Manual Cutting Thermoplastics Melt Flow Rate Meter With Integrated Printer

High-Performance Melt Flow Index Tester for Plastic Materials with Dual Temperature Control and Integrated Printer

Summary:

The melt flow indexer meets the standard requirements of GB / T3682-2000, and the main parameters are also full of ISO1133-97, ASTM1238, JIS. The requirements of other standards can be used for polyethylene, polypropylene, polystyrene, ABS, polyamide, fiber resin, acrylate, polyoxymethylene, fluoroplastic materials, polycarbonate, and other plastic materials are measured by the melt mass flow rate (MFR) or melt volume flow rate (MVR). It’s widely used in plastic production, plastic products, petrochemical and other industries as well as related colleges, scientific research units and commodity inspection departments.

Product Features:

1) High-precision Chinese and English color controllers and special customized membrane keys have unparalleled advantages in control accuracy and service life;

2) Integrated manual automatic cutting control, accurate to 0.1s, can be set arbitrarily cutting time and cutting times;

3) Built-in micro printer, can print test data;

4) Dual temperature control system, using dual imported heating ring, dual imported PT100 platinum; resistance sensor, improve test accuracy and temperature stability;

5) Add displacement sensor to test MVR (volume method) with an accuracy of 0.01mm;

6) MVR test can be output directly without cutting;

7) Test range of MVR can up to 5000 cm³ / 10min by means of plugging die;

8) The density value of the material at a specific temperature can be calculated by the ratio of MFR to MVR;

9) Cutting method: manual and automatic cutting in one machine

10) The heat preservation barrel is made of sus304 stainless steel, which does not rust for a long time;

 Technical Parameters:

Standards.

GB/T3682-2000 "Determination of melt flow rate and melt volume flow rate of thermoplastics"
ISO 1133:1997 "Determination of thermoplastic melt mass flow rate MFR and melt volume flow rate MVR"
ASTM D1238 "Standard Test Method for Determination of Melt Flow Rate of Thermoplastics by Extrusion Plastometer"

Support and Services:

Melt Flow Index Tester Technical Support and Service
We provide technical support and service for all Melt Flow Index Testers. Our technical support team is available via phone, email and online chat 24/7 to answer any questions or concerns you may have. We provide detailed instructions and videos to help you get the most out of your Melt Flow Index Tester.
We also offer a variety of warranty plans and service contracts to keep your Melt Flow Index Tester in top working condition. Our warranty plans cover defects in materials and workmanship for up to 5 years. Our service contracts include on-site maintenance and repairs, as well as the replacement of any parts that are found to be defective.
If you have any questions or concerns about our Melt Flow Index Tester technical support and service, please do not hesitate to contact us.

Packing and Shipping:

The Melt Flow Index Tester is shipped in a sturdy cardboard box, filled with foam to protect the instrument during transit. All accessories are sealed in their own plastic bags and placed in compartments in the box. The box is then sealed with tape that indicates that the instrument has been tested and is ready for use.
When shipping the Melt Flow Index Tester, please ensure that the box is properly sealed and that the packaging is clearly marked with the destination address. The instrument should be shipped using a reliable courier service that offers tracking and insurance.

FAQ:

Q1: What is a Melt Flow Index Tester?

A: The Melt Flow Index Tester, produced by JHH, based in Beijing, China, is a testing instrument used to measure the melt mass-flow rate of thermoplastics.

Q2: What is the purpose of the Melt Flow Index Tester?

A: The Melt Flow Index Tester is used to measure the melt mass-flow rate of thermoplastics, which provides important information for the quality control of plastic materials.

Q3: What kind of thermoplastics can be tested with the Melt Flow Index Tester?

A: The Melt Flow Index Tester can test a wide range of thermoplastics such as polyethylene, polypropylene, ABS, etc.

Q4: What are the features of the Melt Flow Index Tester?

A: The Melt Flow Index Tester has a wide range of features, including a digital display, a data storage function, a user-friendly interface, and a compact design.

Q5: What are the advantages of using the Melt Flow Index Tester?

A: The Melt Flow Index Tester is accurate and reliable, and it can quickly provide important data on the quality of plastic materials. It also has a user-friendly interface and a compact design, making it easy to use and convenient to transport.