Thermoplastics pipes---Determination of resistance to external blows---Round-the-clock method

Product Description:

Thermoplastics pipes---Determination of resistance to external blows---Round-the-clock method/tester is widely used for the external impact strength test of plastic pipes, plastic board and non-metal materials.

For plastic pipe, it covers testing PVC-U water supply pipe, low pressure water supply pipe, core layer foam pipe, double-wall corrugated pipe, carat pipe, steel belt pipe, PE water supply pipe, MPP electric power Pipe, hollow wall winding pipe, CPVC power pipe, etc.

Instrument Features:

• Level 3 protection: Safety protection of the first stage sample door; the second level observation window door and the third level upper and lower limit level.
• Fast lifting: With a large torque stepping motor, the rise rate can reach 250 mm/sec, which can be reached in 8 seconds from zero to 2 meters.
• Intelligent hover: This machine adopts a multi-segment rate control program to ensure the hammer stops smoothly and the control position without deviation.
• Exhaust pipe modeling: The falling hammer pipe adopts 3D modeling to increase the exhaust hole to achieve the minimum wind resistance. At the same time, increase the hoop structure of the pipe to prevent its failure and deformation.
• Pneumatic catch hammer pneumatic release hammer: Abandon the traditional sense of the electromagnetic hammer and the electromagnet hammer, using the pneumatic structure with greater force value, the hammer adopts 300N long-stroke double cylinder, using the hammer surface of the beef tendon plate, the hammer is stable, and no injury; the hammer also adopts the pneumatic structure, which fundamentally solves the cable bending wire and leakage phenomenon. Pneumatic adopts pneumatic automatic locking structure, safe and reliable.
• Integrated, modular assembly: The mechanical part adopts the standard aluminum alloy profile assembly structure, and the electrical part adopts the 7-inch touch screen and Delta PLC, which realizes the characteristics of process standardization, modular installation, light structure and high strength.

Technical Parameters:

Main functions:

This Dropping hammer impact tester/test machine is widely used for the external impact strength test of plastic pipes, plastic board and non-metal materials.

For plastic pipe, it covers testing PVC-U water supply pipe, low pressure water supply pipe, core layer foam pipe, double-wall corrugated pipe, carat pipe, steel belt pipe, PE water supply pipe, MPP electric power Pipe, hollow wall winding pipe, CPVC power pipe, etc.

Defination:

Ture impact rate(TIR):

When the whole batch of products are tested, the total number of impact damage divided by the total number of impacts is the real impact rate, expressed as a percentage.

Destruction:

When observed with the naked eye, cracks, crevice or specimen breakage of the sample after impact are called damage. The indentation or discoloration of the specimen caused by the impact of the drop hammer is not considered to be damage.

Principle:

Plastic pipe drop hammer impact testing machine/testing machine, the pipe or profile to be tested is installed on the work table, and the sample height is adjusted so that its upper surface is just at the lower edge of the photoelectric related system; Select the hammer head and weight according to the requirements of the test standard, and combine the impact hammer; Adjust the height of the electromagnetic vibration absorption system, hang the hammer; At the beginning of the test, the hammer head will fall off freely from the preset height and impact the sample. Observe the rupture of the pipe or profile.

Support and Services:

We offer comprehensive technical support and service for our Drop Hammer Test Equipment. Our team of engineers and technicians can provide expert assistance with installation, maintenance, troubleshooting, calibration, and more. We can also provide custom solutions to meet your specific needs.

We are committed to providing the highest level of customer service and support. Our team is available 24/7 for any questions or concerns.

For more information, please contact us at your convenience.

Packing and Shipping:

The Drop Hammer Test Equipment will be securely packaged in a wooden crate for shipping. The box will contain the equipment, instructions, and any additional parts or accessories. Additionally, the box will be labeled with the equipment name, model, and serial number.

The shipping process will include all necessary paperwork such as an invoice, packing list, and any other documents required for international shipping. The shipping cost will be determined based on the destination and type of shipment.

FAQ:

Q: What is Drop Hammer Test Equipment?

A: Drop Hammer Test Equipment is a testing equipment manufactured by JHH in Beijing, China, which is used to measure the impact resistance of objects.

Q: What is the purpose of Drop Hammer Test Equipment?

A: The purpose of the Drop Hammer Test Equipment is to measure the impact resistance of objects in order to ensure product quality.

Q: What products can Drop Hammer Test Equipment be used for?

A: Drop Hammer Test Equipment can be used for all kinds of pipe (PVC-U water supply pipe, sewage pipe, sewage pipe, low pressure water supply pipe, low pressure transmission pipe, core layer foam pipe, double wall corrugated pipe, PE water supply pipe), and also suitable for hard plastic plate.

Q: What is the accuracy of Drop Hammer Test Equipment?

A: Drop Hammer Test Equipment has an accuracy of up to 0.5%.

Q: What is the maximum testing force of Drop Hammer Test Equipment?

A: The maximum testing energy of Drop Hammer Test Equipment is 300J.