|
Product Details:
Payment & Shipping Terms:
|
| Place Of Origin: | Beijing, China | Product Name: | Pipe Nonlight Transmittance Meter |
|---|---|---|---|
| Control Mode: | Touch Screen Control | Pipe Diameter Range: | Φ16～Φ40 Mm |
| Specimen Length: | 80mm | Grating: | 16、20、25、32、40 |
| Measuring Point: | Three Points | Optical Wavelength: | 540nm～560nm |
| High Light: | lcd transmittance meter,touch screen control transmittance meter,touchscreen non light transmittance meter |
||
POT-M Pipe nonlight transmittance meter
Product Overview
This instrument is used to test the impermeability measurement of plastic pipes and fittings (with percentage shown), instead of the traditional test method of pipe impermeability.
Using industrial touch screen control, with calibration, data analysis and calculation, test results U disk storage, is an equipment for measuring impermeability of water transport pipes or fittings exposed to visible light to prevent the breeding of algae in the tube.
Meet standards:
GB/T 21300－2007 Determination of the impermeability of plastic pipes and fittings
GB/T 2410-2008 Determination of light transmittance and fog degree of transparent plastic
GB∕T 38008-2019 Thermoplastic plastic gate valve
GB/T 37842-2019 Thermoplastic plastic ball valve
GB/T 32018.1-2015 Charge-resistant modified polyvinyl chloride (PVC-M) pipeline system for water supply-Part 1: Pipes
GB/T 32018.2-2015 Charge-resistant and modified polyvinyl chloride (PVC-M) piping system for water supply — Part 2: Pipe fittings
GB/T 18742 1-2017 Polypropylene plumbing system for hot and cold water-Part 1: General Provisions
GB/T 18742.2-2017 Polypropylene piping system for hot and cold water installation-Part 2: Pipes
GB/T 18742.3-2017 Polypropylene piping system for hot and cold water installation-Part 3: Fittings
ISO 7686:2005 Plastics pipes and fittings — Determination of opacity
Instrument characteristics:
1.High-precision standard A parallel light source is used, and the optical wave is strictly controlled within 540~560nm；
2.The optical flux acquisition system adopts a high-precision optical collector and a 24-bit analog-to-digital conversion circuit with stable and reliable measurement results and a resolution of 0.01%;
3,The sample bracket provides three sites for each sample and has a voice prompt function;
4, Color LCD touch screen control and display, convenient operation, intuitive display;
5,Test data can be stored through U disk to facilitate test recording.
6,Small volume, reasonable structure, space saving, stable performance, high efficiency, simple operation and convenient maintenance
Technical parameter
| Control mode | Touch screen control |
| Pipe diameter range | Φ16～Φ40 mm |
| specimen length | 80mm |
| Grating | 16,20,25,32,40 |
| Sample holder | 16,20,25,32,40 |
| Measuring point | Three points |
| Optical wavelength | 540nm～560nm |
| Resolving power | 0.01% |
| accuracy | < 0.05% |
| supply voltage | 220VAC 50Hz 0.10kW(single-phase three wire system) |
| Host size | 530×245×510mm |
| Host weight | ≈20 kg |
Contact Person: Ms. Zoe Bao
Tel: +86-13311261667
Fax: 86-10-69991663
