600kn Steel Tensile Hydraulic Universal Test Machine ISO9001

600KN Steel tensile testing machine/Hydraulic testing machine/universal tester​

1. Application

The main engine is four columns, two screws, oil cylinder, and the stretch space is above the host, and the compression and bending test space is between the lower beam of the host and the table.Measurement and control system using digital multi-channel closed loop control system, with functions of three closed loop, which can make the stress, strain and displacement closed loop control mode, and can make an impact switch, the speed of its stress and strain rate completely accord with national standard GB/T228.1-2010 and other metal tensile test standard requirements.

2. Price advantage

We have increased our own research and development efforts, established a processing center, independently produced core components, and reduced the cost of links under the same quality. Our good quality products can save you more than some other low price but poor quality products. Reducing the failure rate of the machine reduces the maintenance cost of the customer, but also improves the efficiency of the machine, this high quality price can bring real benefits to the customer.

3. Meet Standards
ISO 6934 BS4449, ASTM C39,  ASTM A370, ASTM E4, ASTM E8, ASTME9, ASTMA615, ISO6892, ISO7438, ISO7500-1, ISO 15630 EN10002-4, GB/T228-2002, GB 16491-2008, HGT3844-2008 QBT 11130-1991, HGT 3849- 2008,GB6349-1986, ASTM C165, EN826, EN1606, EN1607, EN12430 etc.
 
4. Principle:

The hydraulic oil in the tank pumps the high-pressure pump into the oil circuit through the motor, which flows through the high pressure filter, the differential valve group, and the servo valve, and enters the cylinder.The computer sends out the control signal to the servo valve, controls the opening and direction of the servo valve, so as to control the flow into the cylinder, so as to achieve the control of equal speed test force and equal velocity displacement and so on.

5. Main technical parameters

Packing and Shipping

Frequently Asked Questions:

Q1. Are your company a trading one or a factory?

A: Factory + trade (ntegration), 18 years focusing on test instnments feld, 14 years export experl ence.

Q2. How to choose the most suitable products?

A: Our professional leam will give you the best suggestion as long as you tell us what kind of test you need to do and the required specification

Q3.what's the dellvery term?

A: At most of time, we have stock in the factory. If there is no stock, normaly, the delivery time is 15-20 working days after deposit receipt

If you are in urgent need, we can consider making special arrangement for you.

Q4.Do you accept customization service?

A: Yes, of course, we can not only offer standard machines, but also customized machines according to your request.

Don't hesitate to tell us your requirement we will try our best to meet your needs.

Q5. Can we visit your factory betore order?

A: Yes, we warmly welcome and sincerely invite you or your team to vist our factory, we will help to arrange hotel and pick up you from airpor.

Q6. How about your warranty?

A: Generaly, our waranty is one year witrin the warranty period. we can offer technlque support and part parts change. Necessarily, our engineers may go to your place for better service.

Q7. How about the packing for machine, Is it safely protected during transportation?

A: Our machine is packed by standard export wooden box, it won't be damaged. We've delivered many testing machines abroad by sea or by ar without damage.