Payment & Shipping Terms:
|Productinon Name:||Moisture Measurement||Max.weight:||100g|
|Weight Readability:||0.001g||Readability Of Moisture:||0.01%|
|Measuring Scope Of Moisture:||From 0.01% To 100%||Repeatability:||±0.2%|
|Display Parameter:||Moisture %、weight、temperature、time|
thermal analysis instruments,
electrical density gauge
Basic introduction of instruments and applicable industries
DHS16-A series halogen lamp drying method electronic moisture meter adopts high performance imported electronic components, combined with high precision electronic balance sensor, to achieve rapid and accurate test sample weight loss moisture, instrument data weight linear high, small deviation. It is widely used in all industries requiring rapid moisture determination, such as the determination of pharmaceutical moisture, chemical sample moisture, plastic moisture, rubber moisture, food moisture, grain moisture, tobacco moisture, ore moisture, iron and steel moisture, agroforestry moisture, tea moisture, textile moisture, paper moisture, fire-proof moisture, coal and other industries in the laboratory and production process. Sample status: debris, powder Particles, viscous, liquid, fiber can be tested
Instrument testing principle
Moisture Analyzer is configured on the basis of high-precision electronic balance weighing sensor and high-efficiency secondary heat radiation device, to achieve rapid and accurate determination of the water. Moisture Meter is a thermodynamic theory based on the material after drying by the weight and wet weight than the percentage of access to content and gouache other results.
1. Using analytical balance sophisticated sensors to ensure high-precision weighing.
2. As the use of high-sensitivity sensors, the test only a few grams of sample with the quality, reduce testing time
3. Use of 400W halogen lamps designed to be of secondary radiation heating source, the sample temperature reached 160 degrees within 2 minutes.
4. Has three kinds of measurements:
1) Automatic mode: Measuring the process of per-minute rate of change of moisture content (drying rate) less than the preset value, the measure will automatically stop, and get measurements.
2) Manual mode: button operation can be terminated by the determination and get measurements.
5. They are equipped with a standard serial interface,connecting to printer or computer.
6. They can be calibrated weighing system and temperature system calibration.
|Readability of Moisture||0.01%|
|Measuring scope of Moisture||From 0.01% to 100%|
|Display parameter||Moisture %,weight,temperature,time|
|Heating temperature range||Room temperature to 160 ℃|
|Timer range (increase by 1 minute)||1 min to 180min|
|Heating source||400W Annular halogen lamp|
|Data output interface||RS232C|
|Net weight||6.5 Kg|